Uniview 2 camera video surveillance kit

Please note that all included items in the kit can be changed as needed!
This means that, for example,

if you need a larger video archive capacity, you can install a larger hard drive;

if you need a camera with an adjustable lens, the camera can also be replaced.

The video surveillance kit includes all the necessary technical equipment:

(prices are indicated including VAT), for a more detailed technical description, click on the link.

1. Two cameras Uniview UAC-T122-AF28LM (35.09eur/each (70.18eur))
   A simple camera with 2MP Resolution and a wide Field of View - 101.5° degrees, good visibility in low light - Light Sensitivity - 0.005lux, and in complete darkness, the camera is equipped with a 40m infrared projector. During night vision, the image is black and white.
   
2. 12V 5A Power Supply (18.15eur)
   The power supply is powerful enough to securely operate up to 4 cameras. It is equipped with screw terminals for convenient wire connection.
   
3. Video Recorder XVR301-04Q3 Uniview (78.65eur)
   The recorder can connect up to 4 such or other standard cameras (HD-CVI, HD-TVI, or CVBS), as well as network IP cameras. For maximum compatibility, it is recommended to use Uniview cameras, but cameras from other manufacturers can also be connected using the Onvif standard. By disabling video analytics features, you can activate 2 additional channels and connect a total of up to 6 cameras, of which 2 can be IP cameras.
   
4. 1TB Hard Drive - memory to store video recordings (70eur)
   With such a capacity disk, you can record approximately 15 days of continuous video material (please note that this is an informative calculation, which is also influenced by the content of the video). If you record motion-triggered videos using video analytics, then, of course, the video archive will be longer and will depend on how much and how often motion is detected.
   
5. !!! FREE OF CHARGE the necessary cable connections are included, such as DC male, BNC male or, if you choose to use CAT5 cable, then video balun connectors with a 50% discount!
   !!! FREE OF CHARGE cable end installation is also included if needed.

The kit does not include and must be additionally purchased cables:

Depending on your situation and needs, you need to choose the most suitable cable solution to connect the cameras to the recorder. Also, it needs to be clarified how long they need to be. We offer to extend them for free to the necessary lengths and add connectors. Optionally, cables can also be purchased on non-extended rolls.

1. The option is coaxial cable RG59, available in both white and black, costs 0.36eur/meter.
• Each camera requires a separate cable.
• The cable ends are included free of charge, and we can also install them for free.
• Additional power supply must be provided - only video and audio signals will be transmitted through the cable.
  The camera also needs to be powered. For this purpose, you can use parallel electric cable 2x0.75, which is also available in both white and black and costs 0.45eur/meter.
  Alternatively, provide power from a power source closer to the camera itself. Then a separate power supply block will be needed instead of a common one.
2. The option is combined coaxial cable RG59+2x0.5. This is a convenient solution. Available in black and costs 0.65eur/meter.
   
• Each camera requires a separate cable.
• Power is supplied to the camera through one cable, and video and audio transmission are also provided.
• Cable ends are included in the kit free of charge, and installation is also included free of charge.
3. The option is CAT5 cable, available in light gray and black, costs 0.49eur/meter.
• The advantage of this solution is that up to 4 cameras can be connected to one CAT5 cable. The cable has 8 pairs of wires, and 1 camera can be connected to each pair.
• Additional power supply must be provided - only video and audio signals will be transmitted through the cable.
  The camera also needs to be powered. For this purpose, you can use parallel electric cable 2x0.75, which is also available in both white and black and costs 0.45eur/meter.
  Alternatively, provide power from a power source closer to the camera itself. Then a separate power supply block will be needed instead of a common one.
• Using CAT5 cable for video transmission, video balun video signal boosters are required, which are available with a 50% discount.

If you have any uncertainties or need advice on what to choose - which cable, which power supply, etc., feel free to call or write your question, we will gladly listen, explain, and help you clarify.