Uniview 3 camera video surveillance kit

Please note that all items included in the package can be changed as needed!
This means that if you, for example,

need a larger video archive capacity, then it is possible to install a larger hard drive in the system;

if an adjustable lens camera is needed, the camera can also be changed

The Video Surveillance Kit includes all the necessary technical equipment:

(prices for items are indicated including VAT), see more detailed technical description by clicking on the link.

1. Three Uniview cameras UAC-T122-AF28LM (35.09eur/each (105.27eur))
   Simple camera with 2MPx Resolution and a wide Field of View - 101.5° degrees, good visibility in low light - Light sensitivity - 0.005lux, and in complete darkness, the camera is equipped with a 40m infrared spotlight. During night vision, the image is black and white.
   
2. 12v 5A power supply unit (18.15eur)
   The power supply unit is powerful enough to safely operate up to 4 cameras. It is equipped with screw terminals for easy connection of wires.
   
3. Video recording device XVR301-04Q3 Uniview (78.65eur)
   The recorder can connect up to 4 such or other standard (HD-CVI, HD-TVI, or CVBS) cameras, as well as network IP cameras. It is recommended to use Uniview cameras to ensure maximum compatibility, but cameras from other manufacturers can also be connected using the Onvif standard, for example.
   By disabling video analytics functions, the recorder can activate 2 additional channels and connect a total of up to 6 cameras, of which 2 would be IP cameras.
   
4. 1TB hard drive - memory for storing video recordings (70eur)
   With a drive of this capacity, you will be able to record approximately 15 days with continuous video material (please note that this is an informative estimate, which is also influenced by the video content).
   If you record based on motion with the help of video analytics, then, of course, the video archive will be longer and will depend on how much and how often motion is detected.
   
5. !!! FREE OF CHARGE the necessary cable connections are included in the kit, such as DC male, BNC male, or if you choose to use CAT5 cable, then video baluns with a 50% discount!
   !!! FREE OF CHARGE cable termination is also included if needed.

Cables are not included in the kit and need to be purchased additionally:

Depending on your situation and needs, you need to choose the most suitable cable solution to connect cameras to the recorder.
And it should be clarified how long they are needed. We offer to extend them to the required lengths for free and attach connections. If necessary, cables can also be purchased on unreinforced rolls at your request.

1. The option is coaxial cable RG59, available in both white and black and costs 0.36eur/meter.
• Each camera requires a separate cable.
• The connector ends are included in the kit FREE OF CHARGE, and they can also be installed FREE OF CHARGE.
• Additional power supply is required - only video and audio signals will be transmitted over the cable.
  The camera also needs to be powered. For this purpose, you can use parallel electric cable 2x0.75, which is also available in both white and black and costs 0.45eur/meter.
  Or power can be provided from the nearest power access point to the camera itself. In this case, a separate power supply unit is required, not a shared one.
2. The option is combined coaxial cable RG59+2x0.5. This is a convenient solution. Available in black and costs 0.65eur/meter.
   
• Each camera requires a separate cable.
• One cable provides power to the camera and ensures video and audio transmission.
• Cable ends are included in the kit free of charge, and their installation is also included free of charge.
3. The option is CAT5 cable, available in light gray and black, costs 0.49eur/meter.
• The advantage of this solution is that one CAT5 cable can connect up to 4 cameras. The cable has 8 pairs of wires, and 1 camera can be connected to each pair.
  
• Additional power supply is required - only video and audio signals will be transmitted over the cable.
  The camera also needs to be powered. For this purpose, you can use parallel electric cable 2x0.75, which is also available in both white and black and costs 0.45eur/meter.
  Or power can be provided from the nearest power access point to the camera itself. In this case, a separate power supply unit is required, not a shared one.
• Using CAT5 cable for video transmission requires video baluns video signal amplifiers, which are available with a 50% discount.

If you have any questions or need advice on what to choose - which cable, which power supply, etc. Feel free to call or write your question, we will be happy to listen, explain, and help you understand.